6410 微步進驅動器
・單一輸入電源,輸入電壓:24~75 VDC
・輸出電流0.625~5A可設定
・微步進提升馬達運動之平滑度及解析度
・馬達靜止保持電流自動下降,降低馬達溫升
・硬體濾波,抗雜訊干擾
・保護電路:
馬達線圈短路及對地間短路保護
內部電源欠電壓保護
過電壓保護
・專利數位式電子阻尼,防止馬達中轉速之不穩定現象
・專利4相,雙極性截波放大電路,適用較大電流及有效減少電流漣波
・脈波速度:最高2.0MHZ,可設定降為500KHZ,以避免受高頻雜訊的干擾
・體積小,尺寸:109.2*127.0mm
・10進位解析度:200. 400. 1000. 2000. 5000. 10000. 25000. 50000
・2進位解析度:400. 800. 1600. 3200. 6400. 12800. 25600. 51200
外部接線圖
Features |
Benefits |
Patented bipolar chopper drive - four-phase PWM (pulse width modulation) chopping electronically controls the motor winding currents at 20 kHz |
Combines the best of recirculating and nonrecirculating current regulation to provide high back EMF rejection with low ripple current and reduced audible and electrical noise |
Digital Electronic Damping |
Damps oscillations in mid-range speed bands common with stepper systems to develop full torque at all motor speeds |
Idle Current Reduction Feature |
Permits an automatic 50% reduction in motor winding current during motor idle conditions to minimize heating during dwell periods |
Output Current Adjustment |
Maximizes application flexibility - output current adjustable from 0.625 to 5.0 amps rms |
原廠網址: http://www.kollmorgen.com/en-us/products/drives/stepper/6400-series/